Repair Riot

Sink Strainer Troubleshooting

When your house revolts, we help you restore order.

On this page

Quick answer

To fix a sink strainer, first remove the strainer and clean out debris. Check for clogs or damage. Replace if necessary. Ensure the plumbing is clear to prevent future issues.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Remove the Strainer
    Do: Use a screwdriver to remove the screws holding the strainer in place.
    Observe: Check for any visible debris or damage.
    Means: Clean out any debris found.
    Next: Inspect the strainer for damage.
  2. Inspect the Strainer
    Do: Look for cracks, corrosion, or other signs of wear.
    Observe: Note any damage or excessive buildup.
    Means: Determine if the strainer needs to be replaced.
    Next: Clean or replace the strainer as needed.
  3. Clean the Strainer
    Do: Soak the strainer in a solution of vinegar and water.
    Observe: Check for any remaining debris or buildup.
    Means: Use a brush to scrub away any residue.
    Next: Reinstall the strainer if it's in good condition.
  4. Replace the Strainer
    Do: Purchase a new strainer that fits your sink.
    Observe: Ensure the new strainer matches the old one in size and type.
    Means: Install the new strainer using the screws provided.
    Next: Test the drain to ensure it's working properly.
  5. Check for Clogs
    Do: Use a plunger to try and clear any clogs in the drain.
    Observe: Look for water draining properly after plunging.
    Means: If the clog persists, you may need to use a drain snake.
    Next: Test the drain again after attempting to clear the clog.
  6. Test the Drain
    Do: Run water through the sink to check for proper drainage.
    Observe: Ensure water drains quickly and without backing up.
    Means: If the problem persists, there may be a deeper issue.
    Next: Consider calling a professional if necessary.

Common causes

CauseLikelihoodDifficultyPart often needed
Clogged Strainer
Food particles, hair, and debris can accumulate and block the drain.
CommonEasyNone
Damaged Strainer
Over time, strainers can crack or corrode, causing leaks and poor drainage.
SometimesEasy–MediumReplacement strainer
Clogged Drain Pipe
Debris can build up in the pipes, restricting water flow.
SometimesMediumDrain snake
Loose Strainer
Screws can loosen over time, causing the strainer to wobble and leak.
CommonEasyNone
Improper Installation
If the strainer was not installed correctly, it can cause drainage issues.
RareMediumReplacement strainer
Garbage Disposal Issues
Problems with the garbage disposal can affect sink drainage.
SometimesMediumNone
Septic or Sewer Problems
Backups in the septic or sewer system can cause slow drainage.
RareHardNone

Parts matching

Ensure you have the correct parts before starting the repair.

Measure your current strainer or take it with you to the hardware store to ensure a proper fit.

When to call a professional

FAQ

How often should I clean my sink strainer?

Clean your sink strainer every few weeks to prevent buildup and clogs. Regular maintenance will keep your drain flowing smoothly.

Can I use chemical drain cleaners on my sink strainer?

It's best to avoid chemical drain cleaners as they can damage pipes and are harmful to the environment. Stick to mechanical methods like plunging or using a drain snake.

What if my sink strainer is leaking?

Check for loose screws or a damaged gasket. Tighten the screws or replace the gasket as needed. If the strainer is cracked, it may need to be replaced.