Repair Riot

Heat Pump Inside Unit Freezing Up

When your house revolts, we help you restore order.

On this page

Quick answer

A freezing heat pump indoor unit is usually caused by airflow issues or refrigerant problems. Turn off the unit, allow it to thaw, check filters and airflow, and contact a professional if the issue persists.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Turn Off the Unit
    Do: Switch off the heat pump at the thermostat and disconnect power from the circuit breaker.
    Observe: The unit stops running and the ice begins to melt.
    Means: Allowing the unit to thaw prevents further damage.
    Next: Wait at least 24 hours for the ice to completely melt.
  2. Check Air Filters
    Do: Remove and inspect the air filters for dirt or debris.
    Observe: Dirty or clogged filters restrict airflow.
    Means: Restricted airflow can cause the coils to freeze.
    Next: Clean or replace the filters if necessary.
  3. Inspect Vents and Registers
    Do: Ensure all vents and registers are open and unobstructed.
    Observe: Blocked vents reduce airflow to the unit.
    Means: Poor airflow leads to coil freezing.
    Next: Clear any obstructions from the vents and registers.
  4. Check Blower Fan
    Do: Inspect the blower fan for dirt or damage.
    Observe: A dirty or malfunctioning blower fan reduces airflow.
    Means: Inadequate airflow causes the coils to freeze.
    Next: Clean the fan or contact a professional for repairs.
  5. Verify Thermostat Settings
    Do: Check the thermostat settings to ensure they are correct for the current mode of operation.
    Observe: Incorrect settings may cause improper operation.
    Means: Improper operation can lead to freezing.
    Next: Adjust the thermostat settings as needed.
  6. Check Refrigerant Levels
    Do: Use a refrigerant leak detector to check for leaks.
    Observe: Low refrigerant levels can cause the coils to freeze.
    Means: Refrigerant leaks require professional attention.
    Next: Contact a professional HVAC technician to recharge or repair the refrigerant system.

Common causes

CauseLikelihoodDifficultyPart often needed
Dirty or clogged air filters
Restricted airflow causes the evaporator coil to freeze.
CommonEasyAir filters
Blocked vents or registers
Reduced airflow leads to coil freezing.
CommonEasyVent covers or registers
Malfunctioning blower fan
Inadequate airflow over the coil causes freezing.
SometimesMediumBlower motor or fan assembly
Low refrigerant levels
Low refrigerant causes the coil temperature to drop below freezing.
SometimesHardRefrigerant and repair kit
Thermostat issues
Incorrect settings or a faulty thermostat can cause improper operation.
RareEasyThermostat
Faulty defrost control board
The defrost cycle does not activate, leading to ice buildup.
RareHardDefrost control board

Parts matching

Common parts needed for a freezing heat pump indoor unit include:

Always use parts recommended by the manufacturer for your specific heat pump model.

When to call a professional

FAQ

Why is my heat pump indoor unit freezing up?

Freezing can be caused by restricted airflow due to dirty filters, blocked vents, or a malfunctioning blower fan. Low refrigerant levels or thermostat issues can also contribute to the problem.

How can I prevent my heat pump from freezing up?

Regularly clean or replace air filters, ensure all vents are open and unobstructed, and schedule annual maintenance with a professional HVAC technician.

Can I fix a freezing heat pump myself?

Basic troubleshooting like checking filters and vents can be done by homeowners. However, issues like refrigerant leaks or electrical problems should be addressed by a professional technician.

How long does it take for a frozen heat pump to thaw?

It can take anywhere from 6 to 24 hours for a frozen heat pump to fully thaw, depending on the extent of the ice buildup and ambient temperature.

Is it normal for a heat pump to freeze in cold weather?

Some frost buildup is normal during the defrost cycle in cold weather. However, excessive or persistent ice indicates a problem that needs to be addressed.