Repair Riot

Water Leak Under Sink: Quick Fix Guide

When your house revolts, we help you restore order.

On this page

Quick answer

First, turn off the water supply valves under the sink. Place a bucket to catch dripping water. Check for obvious leaks from the supply lines or drain. Tighten connections or replace damaged parts as needed.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Access the Area
    Do: Clear out items from under the sink to access the plumbing.
    Observe: Check for visible leaks or water damage.
    Means: Use a flashlight to inspect hard-to-see areas.
    Next: Identify the source of the leak.
  2. Identify the Leak Source
    Do: Check the water supply lines, drain lines, and connections.
    Observe: Look for dripping water, corrosion, or moisture.
    Means: Feel for dampness with your fingers if it's not obvious.
    Next: Determine the cause of the leak.
  3. Tighten Loose Connections
    Do: Use an adjustable wrench to tighten any loose connections.
    Observe: Ensure connections are secure but not over-tightened.
    Means: Avoid using excessive force to prevent damage.
    Next: Check if the leak has stopped.
  4. Replace Damaged Parts
    Do: If tightening doesn't work, replace damaged supply lines or fittings.
    Observe: Ensure new parts match the old ones in size and type.
    Means: Use slip-joint pliers for better grip on fittings.
    Next: Reassemble and test the plumbing.
  5. Check the Drain
    Do: Inspect the drain pipe for leaks or cracks.
    Observe: Look for water pooling around the drain.
    Means: Use a bucket to catch water while testing.
    Next: Replace the drain pipe if necessary.
  6. Test the Repair
    Do: Slowly turn on the water supply valves.
    Observe: Check for any remaining leaks.
    Means: Use towels to catch drips if needed.
    Next: Monitor the area for a few hours to ensure the leak is fixed.

Common causes

CauseLikelihoodDifficultyPart often needed
Loose connections
Vibrations or wear and tear can loosen fittings.
CommonEasyNone (tightening only)
Corroded pipes
Old pipes can corrode over time, leading to leaks.
SometimesMediumReplacement supply lines
Damaged supply lines
Kinks or cracks in the lines can cause leaks.
SometimesEasy–MediumNew supply lines
Faulty drain
Cracks or damage to the drain pipe can lead to leaks.
SometimesMediumNew drain pipe
Clogged drain
Blockages can cause water to back up and leak.
SometimesEasyDrain cleaner or snake
Faulty garbage disposal
Leaks can occur from the disposal seal or connections.
RareMediumNew disposal or seals

Parts matching

Ensure you have the right parts before starting the repair. Match the new parts to the old ones in size and type.

Take the old part to the hardware store to ensure a perfect match.

When to call a professional

FAQ

How do I turn off the water supply to the sink?

Locate the valves under the sink and turn them clockwise to shut off the water.

Can I use duct tape to fix a leak?

Duct tape is not a reliable long-term solution for plumbing leaks. Use plumber's tape or replace the damaged part.

What if the leak is coming from the wall?

A leak from the wall may indicate a more serious issue. Turn off the main water supply and call a professional plumber.