Repair Riot

Washer Making Noise While Washing

When your house revolts, we help you restore order.

On this page

Quick answer

A washer making noise while washing is often due to an unbalanced load or a worn-out part. Check for unevenly distributed laundry, ensure the washer is level, and inspect for loose components. If the noise persists, replace the problematic part.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Check Load Balance
    Do: Pause the washer and redistribute the laundry evenly.
    Observe: Noise stops or decreases significantly.
    Means: The noise was caused by an unbalanced load.
    Next: Continue the wash cycle and monitor for recurrence.
  2. Inspect Washer Level
    Do: Use a level to check if the washer is sitting evenly on the floor.
    Observe: Washer is tilted or wobbling.
    Means: An unlevel washer can cause noise and vibration.
    Next: Adjust the feet until the washer is level.
  3. Secure Loose Components
    Do: Tighten all visible bolts and screws on the washer’s base and drum.
    Observe: Loose parts were found and tightened.
    Means: Loose hardware can cause rattling or knocking sounds.
    Next: Restart the washer and listen for the noise.
  4. Remove Foreign Objects
    Do: Check the drum and filter for small items like coins or buttons.
    Observe: Foreign objects are found and removed.
    Means: Objects trapped in the drum can create noise.
    Next: Run a test cycle to see if the noise is gone.
  5. Inspect Drum Bearings
    Do: Listen closely for a grinding or squealing noise from the drum area.
    Observe: A continuous grinding or squealing sound is heard.
    Means: Worn drum bearings may need replacement.
    Next: Consult the owner’s manual for bearing replacement instructions.
  6. Check Suspension System
    Do: Look for damaged or worn suspension springs or shock absorbers.
    Observe: Springs are stretched, broken, or shock absorbers are leaking.
    Means: A faulty suspension system can cause excessive vibration and noise.
    Next: Replace the damaged suspension parts.
  7. Test with an Empty Load
    Do: Run the washer with no clothes to isolate the noise source.
    Observe: Noise still occurs without a load.
    Means: The issue is likely internal, such as a faulty motor or pump.
    Next: Check the motor and pump for issues.
  8. Inspect Motor and Pump
    Do: Listen for unusual noises from the motor or pump during operation.
    Observe: A loud humming, clicking, or grinding noise is heard.
    Means: The motor or pump may be failing.
    Next: Replace the faulty motor or pump component.

Common causes

CauseLikelihoodDifficultyPart often needed
Unbalanced Load
Clothes are unevenly distributed, causing the drum to vibrate and make noise.
CommonEasyNone
Worn Drum Bearings
Over time, drum bearings can wear out, causing grinding or squealing noises.
SometimesMediumDrum bearings
Loose or Missing Bolts
Loose hardware can cause rattling or knocking sounds during operation.
CommonEasyBolts and screws
Foreign Objects in Drum
Small items like coins or buttons can get caught and create noise.
SometimesEasyNone
Unlevel Washer
A washer that is not level can vibrate excessively and make noise.
CommonEasyAdjustable feet
Faulty Suspension System
Damaged suspension springs or shock absorbers can cause vibration and noise.
SometimesMediumSuspension springs or shock absorbers
Failing Motor or Pump
A malfunctioning motor or pump can produce loud humming, clicking, or grinding noises.
RareHardMotor or pump

Parts matching

If your washer is making noise while washing and requires a part replacement, match your symptom to the most likely part:

Always refer to your owner’s manual for model-specific part numbers and installation instructions.

When to call a professional

FAQ

Why is my washer making a loud thumping noise during the wash cycle?

A loud thumping noise is often caused by an unbalanced load or a worn suspension system. Check the load distribution and inspect the suspension springs or shock absorbers for damage.

Can a noisy washer damage the machine?

Yes, prolonged noise from issues like unbalanced loads or worn parts can lead to further damage, such as broken components or motor failure. Address the issue promptly.

How do I know if the drum bearings need replacement?

If you hear a continuous grinding or squealing noise from the drum area, especially when the washer is running with or without a load, the drum bearings may need to be replaced.

Is it normal for a washer to make some noise during washing?

Some noise is normal, but loud, consistent, or unusual noises are not. If the noise is disruptive or concerning, investigate further to identify the cause.