Repair Riot

Toilet Keeps Backing Up Even After Plunging

When your house revolts, we help you restore order.

On this page

Quick answer

If your toilet continues to back up after plunging, it may indicate a deeper clog or a larger plumbing issue. Try using a toilet auger to clear the blockage, and if it persists, check the main sewer line for obstructions.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Turn Off Water Supply
    Do: Locate and turn the shut-off valve clockwise to stop water flow to the toilet.
    Observe: Water stops filling the tank and bowl.
    Means: Prevents overflow during troubleshooting.
    Next: Proceed to Step 2.
  2. Use a Toilet Auger
    Do: Insert the auger into the toilet bowl and feed it into the drain until resistance is met. Rotate the handle to break up or pull out the clog.
    Observe: Water level in the bowl drops as the clog is cleared.
    Means: The auger can reach deeper clogs than a plunger.
    Next: If the clog is cleared, flush the toilet to test. If not, proceed to Step 3.
  3. Check for Partial Clogs
    Do: Inspect the auger for debris and remove any remaining blockage manually with gloves.
    Observe: Debris or partial clog is visible on the auger.
    Means: Some blockages may require manual removal.
    Next: If the toilet drains freely, move to Step 4. If not, proceed to Step 5.
  4. Inspect the P-Trap
    Do: Check the P-trap under the toilet for visible clogs or buildup.
    Observe: Debris or buildup is visible in the P-trap.
    Means: A clogged P-trap can prevent proper drainage.
    Next: Clean the P-trap if necessary. If the issue persists, proceed to Step 6.
  5. Check Main Sewer Line
    Do: Look for signs of a main sewer line blockage, such as slow drains in other areas of the home.
    Observe: Other drains are also slow or clogged.
    Means: A main sewer line issue requires professional attention.
    Next: If other drains are affected, call a plumber. If not, proceed to Step 7.
  6. Test the Toilet
    Do: Flush the toilet multiple times to ensure it drains properly and doesn't back up.
    Observe: Toilet flushes and drains without issues.
    Means: The problem is resolved.
    Next: If the toilet continues to back up, call a professional plumber.

Common causes

CauseLikelihoodDifficultyPart often needed
Deep Clog in the Drain Line
A plunger can't reach deep clogs, which may require an auger or professional help.
CommonMediumToilet auger
Tree Roots in Sewer Line
Tree roots can infiltrate sewer lines, causing persistent blockages.
SometimesHardProfessional plumbing service
Mineral Buildup or Hard Water Deposits
Mineral deposits can narrow the drain line, leading to recurring clogs.
SometimesMediumDrain cleaner or auger
Toilet Paper or Non-Flushable Items
Toilet paper or items like wipes can accumulate and cause blockages.
CommonEasy–MediumToilet auger or plunger
Clogged P-Trap
The P-trap under the toilet can become clogged with debris over time.
SometimesEasyPlunger or auger
Main Sewer Line Blockage
A blockage in the main sewer line can affect multiple drains and toilets.
SometimesHardProfessional plumbing service
Improper Ventilation in Plumbing System
Poor venting can cause slow drainage and backups.
RareHardProfessional plumbing service

Parts matching

Common parts needed to address a toilet that keeps backing up include:

For recurring backups, consider upgrading to a more powerful toilet auger or consulting a plumber for a thorough inspection.

When to call a professional

FAQ

Can I use a plunger instead of an auger?

A plunger is effective for shallow clogs, but for deeper blockages, a toilet auger is more powerful and reaches further into the drain line.

How can I prevent future clogs in my toilet?

Avoid flushing non-flushable items, use a plunger regularly for minor clogs, and consider using a toilet auger for stubborn blockages.

What if the problem affects other drains in my home?

This may indicate a main sewer line issue, which requires a professional plumber to inspect and clear the blockage.

Is it safe to use chemical drain cleaners for a toilet clog?

Chemical drain cleaners can be harsh and may damage pipes. It's best to use a plunger or auger first before considering chemical solutions.