Repair Riot

Sink Parts Diagram: Identify and Fix Common Issues

When your house revolts, we help you restore order.

On this page

Quick answer

Use a sink parts diagram to locate and identify components like the faucet, drain, and P-trap. Turn off the water supply before disassembling. Replace worn parts such as washers or O-rings to fix leaks.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Turn Off Water Supply
    Do: Locate and turn off the shut-off valves under the sink.
    Observe: Water stops flowing from the faucet.
    Means: Valves are correctly closed.
    Next: Inspect the sink components.
  2. Inspect the Sink Components
    Do: Use a flashlight to examine the faucet, drain, and P-trap for visible damage or wear.
    Observe: Identify any cracked parts, corrosion, or worn washers.
    Means: You can determine which parts need replacement.
    Next: Disassemble the faucet if necessary.
  3. Disassemble the Faucet
    Do: Use an adjustable wrench to remove the faucet handle and cartridge.
    Observe: Handle and cartridge come loose without resistance.
    Means: Components are accessible for inspection.
    Next: Check for worn washers or O-rings.
  4. Check for Worn Washers or O-Rings
    Do: Inspect the washer under the cartridge and the O-ring around the valve seat.
    Observe: Washers or O-rings show signs of wear or cracking.
    Means: Leakage is likely due to these components.
    Next: Replace damaged parts.
  5. Replace Damaged Parts
    Do: Install new washers or O-rings, and reassemble the faucet.
    Observe: Components fit snugly and without gaps.
    Means: Leakage should be resolved.
    Next: Test the sink for leaks.
  6. Test the Sink for Leaks
    Do: Turn the water supply back on and run the faucet.
    Observe: No water leaks from the faucet or drain.
    Means: Repair was successful.
    Next: Monitor for recurring issues.

Common causes

CauseLikelihoodDifficultyPart often needed
Worn Washer or O-Ring
These parts degrade over time, causing leaks.
CommonEasyWasher, O-ring
Clogged Drain or P-Trap
Hair and debris accumulate, slowing drainage.
CommonEasyDrain strainer, P-trap cleaning tool
Loose or Damaged Faucet Handle
Handle screws loosen or the handle cracks.
SometimesEasyFaucet handle, screw
Faulty Cartridge
The cartridge inside the faucet wears out, causing leaks.
SometimesMediumFaucet cartridge
Corroded Valve Seat
Mineral buildup damages the valve seat, leading to leaks.
RareMediumValve seat tool, replacement seat
Cracked Sink Basin
Impact or age causes cracks, leading to leaks.
RareHardEpoxy repair kit or replacement sink

Parts matching

Match your sink's components to common parts for accurate repairs:

Keep a sink parts diagram handy to identify each component before disassembling.

When to call a professional

FAQ

How do I find a sink parts diagram?

Check the manufacturer's website or contact their customer support for a diagram specific to your sink model.

Can I replace a sink faucet myself?

Yes, if you have basic tools and follow the manufacturer's instructions. Turn off the water supply before starting.

Why is my sink still leaking after replacing the washer?

The O-ring or cartridge might also be damaged. Inspect and replace these parts if necessary.

What tools do I need to fix a leaky sink?

You'll need an adjustable wrench, replacement washers/O-rings, plumber's putty, and a flashlight for visibility.

How often should I check my sink for leaks?

Inspect your sink monthly for leaks or clogs, especially under the sink where components are more prone to wear.