Repair Riot

Refrigerator Not Maintaining Temperature

When your house revolts, we help you restore order.

On this page

Quick answer

Check the temperature settings, ensure the door seals are closed tightly, and clean the condenser coils. If the fridge still doesn't cool, the compressor or thermostat may need replacement.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Check Temperature Settings
    Do: Verify the temperature settings on both the fridge and freezer compartments.
    Observe: Settings are correct (35–40°F for fridge, 0°F for freezer).
    Means: Incorrect settings may prevent proper cooling.
    Next: Adjust settings if needed and wait 24 hours to see if temperature stabilizes.
  2. Inspect Door Seals
    Do: Close the door on a piece of paper and try to pull it out.
    Observe: Seals are tight with no gaps or damage.
    Means: Loose or damaged seals let warm air in.
    Next: Replace seals if they are damaged or not sealing properly.
  3. Clean Condenser Coils
    Do: Locate and clean the condenser coils (usually at the back or bottom of the fridge).
    Observe: Coils are free of dust and debris.
    Means: Dirty coils reduce cooling efficiency.
    Next: Allow coils to dry completely before turning the fridge back on.
  4. Check for Obstructions
    Do: Ensure the fridge is not too close to walls and vents are clear.
    Observe: At least 2 inches of space around the fridge for airflow.
    Means: Poor airflow can cause overheating.
    Next: Adjust placement if necessary and monitor temperature over the next 24 hours.
  5. Test Compressor
    Do: Listen for a humming sound when the fridge is running.
    Observe: Compressor is running and producing a steady hum.
    Means: A non-running compressor may be faulty.
    Next: If the compressor is not running, contact a professional technician.
  6. Check Thermostat
    Do: Use a thermometer to verify the internal temperature matches the set temperature.
    Observe: Thermometer reads the correct temperature.
    Means: A faulty thermostat may not regulate temperature correctly.
    Next: Replace the thermostat if it is not functioning properly.

Common causes

CauseLikelihoodDifficultyPart often needed
Incorrect Temperature Settings
Improper settings prevent the refrigerator from cooling effectively.
CommonEasyNone
Damaged Door Seals
Poor seals allow warm air to enter the refrigerator.
CommonEasyDoor gaskets
Dirty Condenser Coils
Dust and debris on coils reduce heat dissipation, causing the fridge to work harder.
CommonEasyNone
Faulty Thermostat
A malfunctioning thermostat may not regulate temperature correctly.
SometimesMediumThermostat
Compressor Issues
A faulty compressor cannot circulate refrigerant, preventing cooling.
SometimesHardCompressor
Blocked Vents or Poor Airflow
Restricted airflow can cause the refrigerator to overheat.
SometimesEasyNone
Overloading the Fridge
Too many items block airflow and prevent even cooling.
RareEasyNone
Refrigerant Leak
A leak in the refrigerant system prevents proper cooling.
RareHardRefrigerant and repair kit

Parts matching

Common parts needed for a refrigerator not maintaining temperature include:

Always purchase parts compatible with your refrigerator model.

When to call a professional

FAQ

How often should I clean the condenser coils?

Clean the condenser coils every 6–12 months to maintain optimal performance.

Can I replace the thermostat myself?

Yes, replacing the thermostat is a common DIY repair, but ensure the refrigerator is unplugged before starting.

Why is my refrigerator running constantly?

Constant running can be caused by a faulty thermostat, dirty coils, or a damaged door seal.

What temperature should my refrigerator be set to?

The refrigerator should be set to 35–40°F (1–4°C), and the freezer to 0°F (-18°C).

How do I know if the compressor is faulty?

A faulty compressor may not run at all or produce unusual noises like clicking or humming without cooling.