Repair Riot

Leak under the sink

When your house revolts, we help you restore order.

On this page

Quick answer

Turn off the water supply, inspect under the sink for wet areas or dripping, and check connections. Tighten loose fittings or replace worn washers and O-rings. If the leak persists, call a plumber.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Turn off the water supply
    Do: Locate and turn off the shut-off valves under the sink. If unavailable, turn off the main water supply.
    Observe: Water stops flowing from the faucet.
    Means: You can safely work on the plumbing without water pressure.
    Next: Inspect the area for the source of the leak.
  2. Inspect the area
    Do: Use a flashlight to look for wet areas, dripping, or corrosion around pipes, fittings, and the drain.
    Observe: Identify the exact location of the leak.
    Means: Pinpoints the source for targeted repairs.
    Next: Check connections and fittings.
  3. Check connections and fittings
    Do: Use an adjustable wrench to gently tighten any loose connections or fittings.
    Observe: Leak stops or reduces.
    Means: Loose connections were the cause.
    Next: If the leak continues, check for worn washers or O-rings.
  4. Check for worn washers or O-rings
    Do: Inspect the faucet base, aerator, and connections for damaged or worn washers and O-rings.
    Observe: Visible damage or wear on seals.
    Means: Seals need replacement.
    Next: Replace the damaged washers or O-rings.
  5. Replace washers or O-rings
    Do: Remove the affected part, replace the old washer or O-ring with a new one, and reassemble.
    Observe: Leak stops after reassembly.
    Means: The replacement fixed the issue.
    Next: Test the repair.
  6. Test the repair
    Do: Turn the water supply back on and check for leaks.
    Observe: No water leaks from the repaired area.
    Means: The repair was successful.
    Next: Monitor for recurring leaks.

Common causes

CauseLikelihoodDifficultyPart often needed
Loose pipe connections
Vibrations or age can loosen fittings, causing water to leak.
CommonEasyWrench
Worn washers or O-rings
Over time, seals degrade and no longer create a tight seal.
CommonEasy–MediumWasher/O-ring kit
Corroded or damaged pipes
Mineral buildup or corrosion weakens pipes, leading to leaks.
SometimesMediumPipe repair kit or replacement pipe
Faulty faucet cartridge
A damaged or worn faucet cartridge can cause water to leak from the spout or base.
SometimesMediumFaucet cartridge
Clogged or damaged P-trap
Debris buildup or physical damage can cause the P-trap to leak.
SometimesMediumP-trap or plumber's putty
Leaking water supply line
Cracks or corrosion in the supply line can cause water to leak.
RareHardReplacement supply line

Parts matching

Common parts needed for a leak under the sink repair include:

Purchase a basic plumbing repair kit that includes common seals and tools for quick fixes.

When to call a professional

FAQ

How do I know if the leak is from the hot or cold water line?

Turn off the hot water valve and check if the leak stops. If it does, the hot water line is the source. Repeat for the cold water line.

Can I use epoxy to fix a small pipe leak?

Epoxy can be a temporary fix for small leaks, but it's not a long-term solution. Replace damaged pipes for a permanent repair.

Why is my sink leaking even after I tightened everything?

If tightening didn't stop the leak, the issue may be a worn washer, damaged O-ring, or a crack in the pipe or fitting.

How often should I check for leaks under the sink?

Inspect under the sink at least once a month to catch leaks early and prevent water damage.