Quick answer
If your dishwasher isn't washing, first check the water supply and filter. Ensure detergent is used correctly and the spray arms are unobstructed. Run a test cycle after cleaning.
Confirm the symptom
- Dishes remain dirty after a full cycle
- Water isn't spraying properly during operation
- No suds or foam visible during the cycle
- Dishes have a film or residue after drying
Tools and prep
- Screwdriver (if needed for filter access)
- Soft brush or toothbrush
- White vinegar or dishwasher cleaner
- Gloves (to protect hands when cleaning)
- Clean cloth or towel
- Ensure the dishwasher is powered off and unplugged before cleaning
Step-by-step troubleshooting
- Check Water SupplyDo: Verify the water inlet valve is open and the water supply is active.Observe: No water entering the dishwasher during the fill cycle.Means: Blocked or closed water supply.Next: Open the valve or check the water line for kinks.
- Inspect and Clean FilterDo: Remove the filter at the bottom of the dishwasher and clean it under running water.Observe: Filter is clogged with food particles or debris.Means: Clogged filter restricts water flow.Next: Reinstall the clean filter and run a test cycle.
- Check Detergent UseDo: Confirm you're using the correct type and amount of dishwasher detergent.Observe: No suds or excessive suds during the cycle.Means: Incorrect detergent can prevent proper cleaning.Next: Use the recommended detergent and measure correctly.
- Inspect Spray ArmsDo: Remove and examine the spray arms for clogs or damage.Observe: Spray arm holes are blocked or the arms don't rotate freely.Means: Clogged or broken spray arms prevent water distribution.Next: Clean the holes with a brush or replace the spray arms.
- Run a Test CycleDo: After cleaning components, run a test cycle with a vinegar rinse to remove buildup.Observe: Dishes come out clean with no film or residue.Means: Cleaning resolved the issue.Next: Monitor performance over the next few cycles.
- Check for Error CodesDo: Look for any error codes on the control panel or in the user manual.Observe: Error code displayed or unusual behavior during the cycle.Means: Internal issue requiring further diagnosis.Next: Refer to the manual for code interpretation.
Common causes
| Cause | Likelihood | Difficulty | Part often needed |
|---|---|---|---|
| Clogged Filter Food debris blocks water flow and cleaning efficiency. | Common | Easy | Dishwasher filter |
| Clogged Spray Arms Mineral deposits or food particles block water jets. | Common | Easy | Spray arm |
| Incorrect Detergent Using the wrong type or amount prevents proper sudsing. | Common | Easy | Dishwasher detergent |
| Low Water Pressure Insufficient water flow limits cleaning power. | Sometimes | Easy–Medium | Water inlet valve |
| Faulty Water Inlet Valve Valve fails to open, preventing water entry. | Sometimes | Medium | Water inlet valve |
| Blocked Drain Standing water prevents proper cleaning and rinsing. | Sometimes | Medium | Drain hose or pump |
| Malfunctioning Pump Pump fails to circulate water through the system. | Rare | Hard | Pump motor |
| Control Board Issues Faulty board disrupts cycle timing or water heating. | Rare | Hard | Control board |
Parts matching
Common parts needed for a dishwasher not washing:
- Dishwasher filter
- Spray arm kit
- Dishwasher detergent
- Water inlet valve
- Drain hose or pump kit
- Pump motor (for older models)
Purchase OEM parts for compatibility and reliability, especially for spray arms and control boards.
When to call a professional
- Dishes remain dirty after multiple cleaning attempts and part replacements
- Error codes persist or worsen after troubleshooting
- Water leaks or unusual noises occur during operation
- You're unable to locate or replace internal components safely
- The dishwasher is under warranty and you don't want to risk voiding it
FAQ
Can I use regular dish soap in my dishwasher?
No, regular dish soap creates excessive suds and can damage the dishwasher. Always use dishwasher-specific detergent.
How often should I clean the dishwasher filter?
Clean the filter monthly to prevent clogs and maintain cleaning performance.
Why does my dishwasher leave a film on dishes?
Hard water buildup or insufficient rinsing can cause film. Use a rinse aid or vinegar to remove it.
What if the spray arms still don't work after cleaning?
Replace the spray arms if they're cracked or consistently clogged despite cleaning.
How do I check water pressure for my dishwasher?
Turn on the water supply and listen for a humming sound. If no water enters, check the inlet valve or water line.