Repair Riot

Dishwasher Not Cleaning Dishes How to Fix

When your house revolts, we help you restore order.

On this page

Quick answer

To fix a dishwasher that isn't cleaning dishes, check for clogged spray arms or filters, ensure proper detergent use, and verify the water temperature. Clean or replace parts as needed and run a test cycle.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Check Spray Arms for Clogs
    Do: Remove the spray arms and inspect for food particles or debris.
    Observe: Spray holes are blocked or partially clogged.
    Means: Clogged spray arms prevent proper water distribution.
    Next: Clean the spray arms with a soft brush and warm water.
  2. Clean the Filter
    Do: Locate and remove the filter at the bottom of the dishwasher.
    Observe: Filter is dirty or clogged with debris.
    Means: A clogged filter reduces water flow and cleaning efficiency.
    Next: Rinse the filter thoroughly and reinstall it.
  3. Verify Detergent Use
    Do: Check the detergent dispenser for proper amount and type of detergent.
    Observe: Detergent is low or incorrect type is being used.
    Means: Insufficient or wrong detergent can lead to poor cleaning.
    Next: Add the recommended amount of high-quality detergent.
  4. Test Water Temperature
    Do: Check the water temperature at the end of the cycle using a thermometer.
    Observe: Water is below 120°F (49°C).
    Means: Cold water doesn't dissolve detergent effectively.
    Next: Adjust the water heater temperature if necessary.
  5. Inspect Inlet Valve
    Do: Check the inlet valve for proper water flow into the dishwasher.
    Observe: Water is not entering the dishwasher at the start of the cycle.
    Means: A faulty inlet valve can restrict water supply.
    Next: Replace the inlet valve if it's not functioning properly.
  6. Run a Vinegar Cycle
    Do: Place a cup of white vinegar in a dishwasher-safe container on the top rack and run a hot water cycle without dishes.
    Observe: Vinegar helps dissolve mineral deposits and buildup.
    Means: Mineral buildup can reduce cleaning performance.
    Next: Repeat the vinegar cycle monthly for maintenance.

Common causes

CauseLikelihoodDifficultyPart often needed
Clogged spray arms
Food particles block water flow to dishes.
CommonEasySpray arms (if damaged)
Clogged filter
Debris in the filter restricts water circulation.
CommonEasyFilter (if damaged)
Low or incorrect detergent
Insufficient detergent doesn't clean effectively.
CommonEasyDetergent
Cold water temperature
Cold water doesn't dissolve detergent properly.
SometimesMediumWater heater adjustment
Faulty inlet valve
Inlet valve not allowing enough water into the dishwasher.
SometimesMediumInlet valve
Mineral buildup
Hard water deposits reduce cleaning efficiency.
SometimesEasyDescaler or vinegar

Parts matching

Common parts needed for a dishwasher not cleaning dishes:

Purchase OEM parts for compatibility and performance.

When to call a professional

FAQ

Why are my dishes still dirty after a full cycle?

This can be due to clogged spray arms, a dirty filter, or using the wrong detergent. Check these components first.

Can I use regular dish soap in my dishwasher?

No, regular dish soap can create excessive suds and damage the dishwasher. Always use dishwasher-specific detergent.

How often should I clean my dishwasher filter?

Clean the filter every 1–2 months to maintain optimal performance.

What water temperature is best for dishwashers?

The water temperature should be at least 120°F (49°C) for effective cleaning and detergent activation.