Fix Bosch Dishwasher E15 Error Code: Quick Guide
Quick answer
The Bosch dishwasher E15 error code indicates a water supply issue. Check the water inlet valve and supply line for blockages or leaks. Clean the valve filter and ensure the water supply is fully open.
Confirm the symptom
- Dishwasher displays E15 error code
- Dishes are not cleaning properly
- No water entering the dishwasher
- Water supply line is cold or not pressurized
Tools and prep
- Screwdriver — To remove panels and access internal components
- Plumber's putty — To seal leaks in water supply connections
- Multimeter — To test electrical continuity of the inlet valve
- Flashlight — To illuminate tight spaces inside the dishwasher
- Bucket — To catch water during valve inspection
Disclosure: We may earn a commission from qualifying purchases via affiliate links. Learn more.
Prep & safety
- Turn off the dishwasher and unplug it from the power source.
- Close the water supply valve to prevent leaks during inspection.
Step-by-step troubleshooting
Check Water Supply Valve
Do: Locate the water supply valve under the sink and ensure it is fully open.
Observe: Valve is open and water flows freely.
Means: Water supply is not restricted.
Next: Proceed to step 2.
Inspect Water Supply Line
Do: Check the flexible supply line for kinks, cracks, or blockages.
Observe: Line is intact and free of obstructions.
Means: No physical damage to the supply line.
Next: Proceed to step 3.
Test Inlet Valve
Do: Use a multimeter to test the inlet valve for continuity.
Observe: Multimeter shows continuity within the specified range.
Means: Inlet valve is functioning properly.
Next: Proceed to step 4.
Clean Inlet Valve Filter
Do: Remove the inlet valve and clean the filter screen with a soft brush.
Observe: Filter is free of debris and sediment.
Means: Clogged filter is resolved.
Next: Proceed to step 5.
Check for Leaks
Do: Inspect all connections for leaks and apply plumber's putty if needed.
Observe: No water leaks are present.
Means: Connections are secure and watertight.
Next: Proceed to step 6.
Restart Dishwasher
Do: Plug in the dishwasher and restart it to see if the error clears.
Observe: Dishwasher operates normally without the E15 error.
Means: Issue was resolved.
Next: Complete
Common causes table
| Cause | Why | Likelihood | Difficulty | Part often needed |
|---|---|---|---|---|
| Clogged inlet valve filter | Debris blocks water flow to the dishwasher. | High | Low | Inlet valve filter |
| Faulty water inlet valve | Valve fails to open and allow water into the dishwasher. | Medium | Medium | Water inlet valve |
| Kinked or damaged supply line | Physical obstruction restricts water flow. | Medium | Low | Supply line |
| Closed or partially closed water supply valve | Water flow is manually restricted. | High | Low | None |
| Low water pressure | Insufficient pressure prevents proper water intake. | Low | High | Pressure regulator |
| Leaking connections | Water leaks reduce pressure and flow. | Medium | Low | Plumber's putty |
Parts matching
When replacing parts for the E15 error, ensure compatibility with your Bosch dishwasher model.
- Water inlet valve: match model number and voltage rating
- Supply line: match diameter and length to original
- Pressure regulator: match inlet and outlet pressure specifications
Consult your dishwasher's manual for exact part numbers and specifications.
Disclosure: We may earn a commission from qualifying purchases via affiliate links. Learn more.
When to call a pro
- If the inlet valve shows no continuity and cannot be replaced safely
- If water pressure issues persist after checking the supply line and valve
- If leaks continue despite sealing connections
- If the dishwasher still displays the E15 error after all troubleshooting steps
FAQ
What does the E15 error code mean on a Bosch dishwasher?
The E15 error code indicates a problem with the water supply, such as a clogged filter, faulty inlet valve, or low water pressure.
Can I fix the E15 error without calling a technician?
Yes, in most cases you can resolve the issue by checking the water supply valve, cleaning the inlet valve filter, and inspecting the supply line for blockages.
How do I test the water inlet valve?
Use a multimeter to test for continuity. If there is no continuity, the valve may need to be replaced.
Why is my dishwasher not getting water even though the supply valve is open?
A clogged inlet valve filter or a kinked supply line could be preventing water from reaching the dishwasher.