Repair Riot

AC Not Cooling House: Troubleshooting Guide

When your house revolts, we help you restore order.

On this page

Quick answer

If your AC isn't cooling your house, first check the thermostat settings and air filter. Ensure the outdoor unit is clear of debris and the circuit breaker hasn't tripped. If these don't resolve the issue, the refrigerant or compressor may need professional attention.

Confirm the symptom

Tools and prep

Step-by-step troubleshooting

  1. Check Thermostat Settings
    Do: Verify the thermostat is set to 'Cool' and the desired temperature is lower than room temperature.
    Observe: Thermostat displays correct mode and temperature.
    Means: Thermostat is functioning correctly if settings are correct.
    Next: If settings are correct, proceed to step 2.
  2. Inspect Air Filter
    Do: Remove and examine the air filter for dirt or blockage.
    Observe: Filter is dirty or clogged.
    Means: A dirty filter restricts airflow and reduces cooling efficiency.
    Next: Replace or clean the filter, then restart the AC.
  3. Check Outdoor Unit
    Do: Inspect the outdoor unit for debris, leaves, or obstructions.
    Observe: Unit is clear of blockages and fan spins freely.
    Means: Clear access allows proper airflow for the condenser.
    Next: If clear, move to step 4.
  4. Verify Circuit Breaker
    Do: Check the electrical panel for a tripped breaker related to the AC.
    Observe: Breaker is in the 'On' position.
    Means: AC has consistent power supply.
    Next: If breaker is tripped, reset it and monitor AC performance.
  5. Test Evaporator and Condenser Coils
    Do: Use a flashlight to check for dirt on the coils inside the indoor unit and outdoor unit.
    Observe: Coils are dirty or covered in dust.
    Means: Dirty coils reduce heat transfer efficiency.
    Next: Clean coils with a soft brush or vacuum, then restart the AC.
  6. Check Refrigerant Levels
    Do: Look for signs of refrigerant leaks, such as hissing sounds or ice on the refrigerant lines.
    Observe: No visible leaks or ice buildup.
    Means: Refrigerant levels are likely sufficient.
    Next: If leaks are suspected, contact a professional HVAC technician.

Common causes

CauseLikelihoodDifficultyPart often needed
Dirty Air Filter
Blocks airflow, reducing cooling efficiency.
CommonEasyAir filter
Clogged Condenser Coils
Reduces heat dissipation from the system.
CommonEasy–MediumCoil cleaning brush
Low Refrigerant
Insufficient refrigerant prevents proper cooling.
SometimesHardRefrigerant recharge (professional service)
Tripped Circuit Breaker
Interrupts power to the AC unit.
CommonEasyNone
Faulty Thermostat
Incorrect temperature readings or settings.
SometimesMediumThermostat
Malfunctioning Compressor
Fails to circulate refrigerant effectively.
RareHardCompressor replacement

Parts matching

Common parts needed for an AC not cooling issue include:

Always use parts compatible with your AC model. Consult the owner's manual for specific requirements.

When to call a professional

FAQ

Why is my AC running but not cooling the house?

This could be due to a dirty air filter, low refrigerant, or a malfunctioning compressor. Check the filter and thermostat first, then inspect for refrigerant leaks.

How often should I replace my AC air filter?

Replace the air filter every 1–3 months, depending on usage and environment. More frequent changes are needed in dusty areas or with pets.

Can I recharge my AC refrigerant myself?

Refrigerant recharge is a task for licensed professionals. Attempting it yourself can be dangerous and may violate environmental regulations.

What does it mean if my AC is freezing up?

An AC freezing up usually indicates poor airflow due to a dirty filter or coils, or low refrigerant levels. Turn off the unit and address the airflow issue first.